Tripod Floor Lamp with Wood Legs and Linen Shade

This tripod floor lamp features three solid rubberwood legs, each 150 cm long and 3 cm in diameter, finished with a natural clear lacquer. The legs are connected at the top by a metal bracket and spread to a diameter of approximately 80 cm at the base. The overall height of the lamp is 155 cm when fully assembled. The lamp shade is a cylindrical shape made of natural linen fabric (100% linen) in an unbleached oatmeal color. The shade dimensions: 40 cm diameter, 25 cm height. The shade is attached to a standard metal harp and held in place by a finial. The lamp uses one E26 bulb (not included), maximum 60 watts incandescent or equivalent LED. A 2-meter brown fabric cord runs down one of the legs (secured by plastic clips) and ends with a foot switch (on/off). The foot switch is a flat button that you press with your toe; it is located 15 cm from the plug end, not on the lamp body. Assembly required: insert the metal bracket into the leg tops, tighten the screws, then route the cord along one leg. The legs have rubber caps at the bottom for floor protection and to prevent slipping. The wood legs may have natural grain variations, knots, and slight color differences – these are not defects. The linen shade is not removable for washing; spot clean only with a dry cleaning solvent or a soft brush. Do not place the lamp near open flames or high heat sources. The tripod design is stable on level floors but may wobble on uneven surfaces. Adjust the leg spread slightly to level; the legs do not have individual leveling feet. The lamp weight is 2.5 kg. The product is intended for indoor residential use. Do not exceed the maximum bulb wattage. The foot switch is rated for 2A at 120V. To clean the legs, wipe with a damp cloth and dry immediately; avoid soaking.