Adjustable Architect Floor Lamp with Swing Arm

This architect-style floor lamp is designed for task lighting. It features a heavy steel round base (25 cm diameter, 1.5 cm thick) with a matte black powder-coated finish. The lamp has two adjustable arms connected by tension knobs, allowing the lamp head to be positioned at various heights and angles. The total height range is from 110 cm to 150 cm, and the reach (horizontal extension) is up to 80 cm. The lamp head is a metal cone shade, 15 cm in diameter, with a built-in socket for an E26 bulb (maximum 60 watts incandescent or 15 watts LED). The shade has a metal mesh guard to protect against accidental contact with the bulb. The arms are made of steel with exposed springs that counterbalance the weight of the head. A 2-meter black cord runs from the base, with an inline rocker switch located 50 cm from the base. The base has a felt bottom to prevent floor scratches. Assembly is minimal: screw the lower arm into the base, then attach the upper arm and shade. All hardware and a hex key are included. The lamp is not motorized; all adjustments are manual. The tension knobs need to be tightened firmly to hold position; over time, they may require re-tightening. The maximum recommended load on the arm? Not applicable; the lamp head is lightweight. The lamp does not include a bulb. The product is intended for indoor use in dry locations. Do not use the lamp to support any other objects. The metal surfaces can be cleaned with a dry cloth. Avoid touching the bulb when hot. The lamp is tested to comply with electrical safety standards. The base weighs 3.5 kg to ensure stability even when the arm is fully extended. However, if the arm is extended sideways beyond the base edge, the lamp may tip if bumped. Place the lamp on a stable, level surface. The adjustment knobs may be stiff initially; this is normal. The lamp weight: 5 kg total.