Industrial Cage Floor Lamp with Edison Bulb

This industrial-style floor lamp features an exposed cage shade made of matte black iron wire, designed to showcase a decorative Edison-style bulb (not included). The lamp stands 150 cm tall. The base is a cast iron cross-shaped piece measuring 25 cm by 25 cm with a weight of 4 kg to prevent tipping. The pole is a 2.5 cm diameter black iron pipe with a threaded appearance. The cage shade is cylindrical with a height of 20 cm and diameter of 18 cm, leaving the bulb visible from all sides. The lamp uses one standard E26 bulb, maximum 60 watts incandescent or LED equivalent. The manufacturer recommends a ST64 or ST58 Edison-style LED bulb for aesthetic purposes, but any E26 bulb works. A 1.5-meter black fabric cord with an inline foot switch (round button) is attached. The foot switch is located on the cord near the base. Assembly required: screw the pipe sections together, attach the cage shade to the socket, then screw the bulb in. No tools required. The lamp has no shade cover; the bulb is exposed. Therefore, do not touch the bulb when lit; allow it to cool before handling. Keep the lamp away from flammable materials such as curtains or paper. The iron parts have a matte powder coating that may scratch if handled roughly. Clean with a dry cloth; avoid moisture to prevent rust. The lamp is for indoor use only, in dry locations. The base has rubber pads on the underside to protect floors. The product does not include a bulb. The maximum wattage rating must not be exceeded. The lamp is not dimmable unless a dimmable bulb and an external dimmer are used; the lamp itself has no dimmer. The overall weight is 5.2 kg. The exposed bulb may be hot enough to cause burns; place the lamp out of reach of small children. The cage does not prevent fingers from touching the bulb; small gaps exist.